3D raised effect textile transfer

PrintMyTransfer > Ordering guide > Blog > 3D raised effect textile transfer
[23 July 2026]

Sharp contours, easier weeding, 0.6mm raised relief: the 3D laser cut transfer adds a real visual and tactile dimension to your textile marking.

At PrintMyTransfer, our 3D weeding board is pre-cut directly into the raised material. Here are its characteristics, uses and application information.

Sheet of 3D raised effect laser cut transfers for textile marking

What is a 3D laser cut transfer?

Transfers are pre-cut using a laser, directly within the raised material, and delivered on a 23 x 40 cm board. This innovative technique delivers optimal results, with particularly sharp contours as well as fast, easy weeding.

The Laser Cut 3D transfer is available in black, white or reflective silver. This particularly eye-catching marking adds real value to sportswear, workwear or promotional textiles.

Technical characteristics

  • Laser cutting directly within the material
  • Weeding board in 23 x 40 cm format
  • 0.6mm raised relief
  • Flame-retardant, ISO EN15025 standard (reflective silver shade)
  • Without PVC, phthalates or BPA
  • OEKO-TEX® STANDARD 100 labelled and REACH compliant

OEKO-TEX® STANDARD 100 labelled
Label no.: CQ 580/2 IFTH
Tested for harmful substances – www.oeko-tex.com

Which materials and uses?

The 3D transfer is suitable for all types of textiles, including sublimated fabrics, in light as well as dark colours:

  • Lightweight garments: sweatshirts, T-shirts, vests, polos…
  • Technical apparel: windbreakers, jackets, safety vests, parkas…
  • Accessories and bags: laptop cases, caps…

Application information

Pre-heat the textile at 170-180°C for 5 to 10 seconds.

Apply at 170-180°C for 15 to 20 seconds.

Cold peel.

Frequently asked questions

What shades is the 3D transfer available in?

The Laser Cut 3D transfer is available in black, white or reflective silver.

Is the 3D transfer flame-retardant?

The reflective silver shade is flame-retardant to the ISO EN15025 standard.

How thick is the raised relief?

The 3D transfer’s raised relief is 0.6mm thick.

Can this transfer be applied to a sublimated textile?

Yes, the 3D transfer is suitable for all types of textiles, including sublimated fabrics, in light as well as dark colours.

Discover our Laser Cut 3D transfer and all our laser cut transfers, or contact us for tailored advice.