Transfers are pre-cut using a laser, directly within the raised material and delivered on a 23x40cm board.
This innovative technique delivers optimal results with transfers featuring particularly sharp contours and fast, easy weeding.
Our Laser Cut 3D transfer is available in black, white or reflective silver.
This 3D marking, particularly eye-catching, will add real value to your sportswear,
workwear or promotional textiles.
Find out more: our guide to the 3D raised effect transfer.

OEKO-TEX® STANDARD 100 labelled
Label no.: CQ 580/2 IFTH
Tested for harmful substances –
www.oeko-tex.com
The 3D transfer is suitable for all types of textiles including sublimated fabrics, in both light and dark colours.
23 x 40 cm
Pre-heat the textile at 170-180 °C for 5 to 10 seconds, then apply the Laser Cut 3D transfer at 170-180 °C for 15 to 20 seconds.
The carrier is peeled off cold.
The PrintMyTransfer Laser Cut 3D transfer can be washed at up to 60 °C.
The PrintMyTransfer Laser Cut 3D transfer can be applied to all types of textiles, even sublimated ones, in light or dark colours.
Laser Cut can be ordered from 5 boards of 23 x 40 cm, up to 100 boards.
For a larger quantity, contact us.
A PrintMyTransfer Laser Cut board is manufactured in D+5 working days, depending on quantity and availability.