To apply your screen-printed transfers, you will need one and only one tool: a heat press. There are a good number of manual and automatic heat press models… After choosing the heat press that suits you best, you need to learn how to use it.
Given the various heat press models available, we will explain today how to use the following heat presses:
To begin, switch on your press. You can then set the temperature and duration you will need to apply your transfers. (These settings are provided with your transfers in an application guide, but will need to be adjusted according to the nature of your support.)
You need to wait a few minutes for the temperature to rise.
Once the press has reached the desired temperature, you can position your support on the lower platen and place the transfer on it.
You can then close the upper platen.
The timer sounds when the heating time is reached and you can then open the platen to remove the now-marked support.
Depending on the press model, settings can be made on a digital screen or using a dial system.
You can switch on the press and set the temperature, time and pressure settings.
When the desired temperature is reached, place your support on the lower platen and position the transfer on the fabric to be marked.
Close the upper platen and wait. When the heating time is up, the upper platen opens automatically.
Switch on your press and enter the information needed for your screen-printed transfer application: duration, temperature, pressure.
Position your support on the first lower platen and apply the transfer to be marked on it. At this stage, the upper platen is necessarily above the 2nd platen, to allow you to handle your elements on the first platen.
When you are ready to press, move the upper platen to position it above your support, parallel to the lower platen. Press the buttons to lower the platen. The pressure is applied automatically; simply wait.
In the meantime, you can already prepare your elements to press on the second platen.
When the heating time is reached, the platen rises automatically. You can then take it and move it over the second platen, which is ready to receive heating.
The operation is the same as for the presses above, except that the action is performed by pressing a pedal or push button and the upper platen moves automatically.
There you have it: you now know how to use your heat press! You can now order and apply as many screen-printed transfers as you wish.