08/11/2019
The backing paper of a SeriQuadri transfer (multicolour) or SeriOne (single colour) must always be removed once the material it was applied to has fully cooled down. If the material is handled while still hot and the paper moves, there’s a risk that the transfer edges will lift. To avoid this, we recommend ...
08/11/2019
PrintMyTransfer screen-printed transfers can be applied to most windbreaker and nylon items. However, you must always test before production. Application conditions vary from one material to another. Usually, press between 120°C and 140°C for 15 to 25 seconds, but on some items, application is done at around 105°C ...
08/11/2019
It depends on the item and the type of transfer chosen. On softshell, there is often an issue with dye migration from the material through the transfer, especially on black and red items. You must carry out the following test: apply the transfer at 130°C for 25 seconds, then place it near a heat source ...
08/11/2019
Our team doesn’t retouch your files. Our online tool lets you independently check how your transfer looks on the chosen fabric colour and make adjustments yourself. Once you accept the preview, only that preview is considered final. If you’d like us to make changes to your file ...
1 page - 4 results