Direct-to-garment printing (DTG) is one of the most innovative technologies in the textile printing world. As its name suggests, it allows prints to be applied directly onto textiles (T-shirts, jumpers, etc.).
Technically, DTG printing involves spraying very fine droplets of colour ink precisely onto a textile. These droplets are then absorbed by the fibres of the garment. This technique is very similar to that of an inkjet printer.
As with any textile printing technique, it’s not all perfect! There are always advantages and disadvantages.
Direct-to-garment printing is known for these main advantages:
Precision in lines
DTG printing also comes with some parameters and disadvantages to bear in mind:
At first glance, it is also possible to notice a bad smell and/or some stains on the print. Normally, these defects disappear after washing.
In terms of use, DTG printing is particularly appreciated for:
Complex designs
Digital printing is one solution, but not the only one! At Printmytransfer, we strongly prefer the technique of screen-printed transfers combined with offset printing, which gives them, in addition to their high quality, an unmatched photo-quality print.
Want to learn more about screen-printed transfers or offset printing? Head over here or ask us your questions directly on the chat.
Three ways to print a multicoloured design on a textile, which need neither the same equipment nor the same quantities. DTF transfers and screen printed transfers arrive ready to apply:
| Criterion | DTG (direct printing) | DTF transfer | Screen printed transfer |
|---|---|---|---|
| Principle | Ink is sprayed directly into the fibres of the garment | The design is printed on a film, then heat-pressed onto the textile | Inks are laid on transfer paper, then heat-pressed |
| Equipment in your workshop | DTG printer, textile pre-treatment and drying | A heat press: transfers arrive ready to apply | A heat press: transfers arrive ready to apply |
| Textiles | At least about 70% cotton | Cotton, polyester, lycra, polyamide, light or dark | Most textiles, including technical fabrics and sublimated polyester depending on the range |
| Quantities | One-off pieces or short runs | No minimum order | More economical on larger runs |
| Wash resistance | Colours slightly paler after the first washes | Up to 60 °C | Up to 72 °C depending on the range |
With DTG, the printer lays the ink directly on the garment, which must be mostly cotton. With DTF, the design is printed on a film and then transferred with a heat press: it can be applied to cotton, polyester, lycra or polyamide, light or dark.
We cover both techniques in detail in the article DTG or DTF.
The DTF transfer: it can be ordered with no minimum, from A6 to A2 format or by the metre, and is produced in D+1 to D+2 working days. A heat press is all you need to apply it, without investing in a textile printer.
Yes, but the textile first needs a pre-treatment and a white underbase, which significantly increases the cost compared with a white textile. A DTF or screen printed transfer can be applied to light and dark textiles alike.
Request free samples of DTF and screen printed transfers in the contact form by choosing “Samples”: test them on your own textiles before ordering.
Ready-to-apply DTF and screen printed transfers, pressed with a simple heat press.