FAQ > Transfer application

PrintMyTransfer > How does it work ? > FAQ > Transfer application

My transfer edges don't stick

11/02/2020

The support paper of FourColor (multicolor) or OneColor (1 single color) transfer must absolutely be removed when the material where it was applied has cooled down. When the material is handled when it is hot and the paper moves, there’s a chance that the transfer sides unstick. To solve this risk, we recommend you to pass a clean cloth ...

Read more

I put my screen-printed transfer on windbreakers or nylon and my transfer doesn't stick.

11/02/2020

Printmytransfer screen-printed transfers can be put on most nylon and windbreaker items. However, you must do tests before any production. The application conditions are different depending on the materials. Usually, you have to press between 120°C and 140°C during 15 to 25 seconds, but on some items, the application has to be done at 105°C for 5 seconds. Don’t ...

Read more

Can a Printmytransfer screen-printed transfer be put on softshell items ?

11/02/2020

It depends on the item and the transfer type you chose. On softshell, there is often a problem of color bleeding of support tye through the transfer, especially on black and red items. You must imperatively make the following test : apply the transfer at 130°C for 25 seconds and place it near a heating source (radiator, sunny place...) ...

Read more

Do Printmytransfer teams retouch the files ?

11/02/2020

Our teams don’t retouch your files. Our online tool allows you to independently check your transfer result on the color of the fabric you chose and make adjustments. When you accept the result, only it is valid. If you wish an intervention on your file, you have access to the “Compliance option” (30€ flat rate) when you order. Warning ...

Read more

1 page - 4 résultats